|
Aarid
has one location in the Baltimore-Washington-Northern Virginia
metropolitan area from which to serve you. Our Main Office and
Fairfield Warehouse is located at 1340 Chesapeake Avenue, Baltimore,
MD 21226.
For questions contact Customer
Service.
FROM WASHINGTON, DC
FROM WEST OF BALTIMORE
FROM NORTH/NORTHEAST OF BALTIMORE
FROM DOWNTOWN BALTIMORE
SPECIAL TRUCKERS
NOTICE
FROM
WASHINGTON, DC
Using
I-95 | Overview
Map | Closeup Map
Travel North from Washington to Baltimore. As the skyline of the
city buildings becomes visible you will take Exit 54. This will
be Hanover Street traveling southbound. Follow Hanover Street
south across the bridge. After crossing the bridge, the street
will split to the right, a one way part of the street. Continue
following south until you pass through three stop lights and reach
the signs for Port of Baltimore, Fairfield Terminals, Frankfurst
Avenue. When the street splits, follow to the left onto Frankfurst
Avenue. Continue on Frankfurst through two additional stop lights
and under a highway overpass. After passing under the highway,
the street will split. Follow the to right onto Shell Road. Take
the next left hand turn onto Chesapeake Avenue. The office and
warehouse are approximately 2 blocks on the left hand side at
number 1340. There is a large sign on the front of the building.
The door to the office is on the right hand side of the building.
Please see the downstairs receptionist.
Using
Maryland 295 | Overview Map
| Closeup Map
Travel
North from Washington to Baltimore. After passing under I-695,
the Baltimore beltway, take the exit for I-895 North, the Harbour
Tunnel Thruway. Follow I-895 to the toll booth plaza. When arriving
at the toll plaza, enter on of the right hand lanes. The toll
here is $1.00. After leaving the toll booth, take Exit 9. DO NOT
GO THROUGH THE TUNNEL. At the bottom of the exit 9 ramp turn right
onto Childs Street and make another immediate right onto Frankfurst
Avenue. Continue on Frankfurst Avenue until you pass under an
exit ramp. Make the immediate left hand turn onto Shell Road.
This turn is a series of islands in the roadway. Once on Shell
Road, make the next left hand turn onto Chesapeake Avenue. The
office and warehouse are approximately 2 blocks on the left hand
side at number 1340. There is a large sign on the front of the
building. The door to the office is on the right hand side of
the building. Please see the downstairs receptionist.
FROM
WEST OF BALTIMORE
Using
I-70 | Overview Map
| Closeup Map
Follow either I-70 or I-795, East to Baltimore. Take I-695 South
in the direction of Glen Burnie. Take I-95 North in the direction
of downtown Baltimore and New York. As the skyline of the city
buildings becomes visible you will take Exit 54. This will be
Hanover Street traveling southbound. Follow Hanover Street south
across the bridge. After crossing the bridge, the street will
split to the right, a one way part of the street. Continue following
south until you pass through three stop lights and reach the signs
for Port of Baltimore, Fairfield Terminals, Frankfurst Avenue.
When the street splits, follow to the left onto Frankfurst Avenue.
Continue on Frankfurst through two additional stop lights and
under a highway overpass. After passing under the highway, the
street will split. Follow the to right onto Shell Road. Take the
next left hand turn onto Chesapeake Avenue. The office and warehouse
are approximately 2 blocks on the left hand side at number 1340.
There is a large sign on the front of the building. The door to
the office is on the right hand side of the building. Please see
the downstairs receptionist.
FROM
NORTH/NORTHEAST OF BALTIMORE
Using
I-83
| Overview Map | Closeup
Map
Travel
South on I-83 to Baltimore. Take I-695 East in the direction of
Essex/Dundalk. Exit onto I-95 South. Follow I-95 onto I-895 South.
This will take your through the Harbour Tunnel. After exiting
the tunnel and the toll booth plaza, take the second exit, 8A
onto Shell Road. At the split, go right continuing on Shell Road.
Take the next left hand turn onto Chesapeake Avenue. The office
and warehouse are approximately 2 blocks on the left hand side
at number 1340. There is a large sign on the front of the building.
The door to the office is on the right hand side of the building.
Please see the downstairs receptionist
Using
I-95
| Overview Map | Closeup
Map
Travel
South on I-95 to Baltimore. Exit onto I-895 South, the Harbour
Tunnel Thruway. This will take your through the Harbour Tunnel.
After exiting the tunnel and the toll booth plaza, take the second
exit, 8A onto Shell Road. At the split, go right continuing on
Shell Road. Take the next left hand turn onto Chesapeake Avenue.
The office and warehouse are approximately 2 blocks on the left
hand side at number 1340. There is a large sign on the front of
the building. The door to the office is on the right hand side
of the building. Please see the downstairs receptionist.
FROM
DOWNTOWN BALTIMORE
From
The Inner Harbour
| City Map | Closeup
Map
Follow
Light Street South approximately 7 blocks. Turn Right on Ostend
Street and go two blocks. Turn Left on Hanover Street. Follow
Hanover Street south across the bridge. After crossing the bridge,
the street will split to the right, a one way part of the street.
Continue following south until you pass through three stop lights
and reach the signs for Port of Baltimore, Fairfield Terminals,
Frankfurst Avenue. When the street splits, follow to the left
onto Frankfurst Avenue. Continue on Frankfurst through two additional
stop lights and under a highway overpass. After passing under
the highway, the street will split. Follow the to right onto Shell
Road. Take the next left hand turn onto Chesapeake Avenue. The
office and warehouse are approximately 2 blocks on the left hand
side at number 1340. There is a large sign on the front of the
building. The door to the office is on the right hand side of
the building. Please see the downstairs receptionist.
From
West Central Baltimore
| City Map | Closeup
Map
Follow
Howard Street or Martin Luther King Boulevard South. Both streets
run into I-395 South. Once on I-395 take the exit for I-95 North,
New York. Once on I-95, take the first exit, Exit 54 for Hanover
Street. Follow Hanover Street south across the bridge. After crossing
the bridge, the street will split to the right, a one way part
of the street. Continue following south until you pass through
three stop lights and reach the signs for Port of Baltimore, Fairfield
Terminals, Frankfurst Avenue. When the street splits, follow to
the left onto Frankfurst Avenue. Continue on Frankfurst through
two additional stop lights and under a highway overpass. After
passing under the highway, the street will split. Follow the to
right onto Shell Road. Take the next left hand turn onto Chesapeake
Avenue. The office and warehouse are approximately 2 blocks on
the left hand side at number 1340. There is a large sign on the
front of the building. The door to the office is on the right
hand side of the building. Please see the downstairs receptionist.
SPECIAL
NOTICE TO TRUCKS
Trucks
with measurements over 13'6" high and 96" wide are not
allowed through the Harbour Tunnel. Trucks of 102" wide may
use the I-95 Fort McHenry Tunnel as an alternate taking the first
exit south of the Tunnel for Key Highway. At the end of the exit
ramp make a right on McComas Street and then a left on Hanover
Street. Follow the directions from Hanover Street above.
No
hazardous materials of any kind are allowed on the Harbour Tunnel
Thruway or the Fort McHenry tunnels. From the north or east the
alternate route is the Francis Scott Key bridge, I-695 East. After
crossing the bridge, take the first exit inbound toward the city.
This is Hawkins Point Road. Follow inbound - this runs into Curtis
Avenue. Follow Curtis Avenue until it intersects with Patapsco
Avenue. Turn right on Patapsco Avenue, follow under the railroad
bridges. Turn left at the next stop light, Shell Road. Make the
next right on Childs Street. Make the next right on Chesapeake
Avenue. Aarid is one block on the left. From the south or west
follow the above directions for I95 or MD295.
For
questions contact Customer
Service
|
